Fusaka follows this yr’s Pectra upgrade, representing a significant step ahead in Ethereum’s scaling roadmap by introducing PeerDAS and key enhancements that improve blob throughput, L1 efficiency, and person expertise.
This submit broadcasts the testnet activation schedule for the primary three testnets, starting with Holesky at slot 5,283,840 (October 1, 2025, 08:48:00 UTC). See the activation table beneath for the entire Sepolia and Hoodi timeline. Fusaka additionally introduces Blob Parameter Solely (BPO) forks to securely scale blob throughput after PeerDAS activation. These are minimal, config-only upgrades that alter the blob goal/max and price replace fraction.
The Fusaka testnet consumer releases are listed below. As soon as all three testnets have efficiently upgraded, a mainnet activation slot might be chosen.
Fusaka Overview
Fusaka’s headlining EIP is PeerDAS (Peer Information Availability Sampling), which allows vital blob throughput scaling. The improve additionally contains optimizations throughout execution and consensus layers to scale L1 efficiency and enhance person expertise. This submit outlines the most important enhancements. For a extra complete overview, see ethereum.org’s guide to the upgrade.
Scale Blobs: PeerDAS
EIP-7594 introduces PeerDAS, a brand new networking protocol that permits nodes to confirm blob knowledge availability via sampling fairly than downloading full blobs. This can be a key step towards scaling blob throughput whereas sustaining Ethereum’s safety and decentralization.
Because the Dencun upgrade, layer 2 utilization has grown considerably, typically reaching the present 9 blob per block restrict. PeerDAS permits Ethereum to extend this restrict with out compromising on safety. It does so through the use of erasure coding to permit nodes to pattern parts of blob knowledge whereas nonetheless cryptographically guaranteeing that the total knowledge is out there throughout the community. This creates a path towards larger blob targets outlined in Ethereum’s scaling roadmap.
This sampling strategy immediately advantages layer 2 rollups by supporting larger blob throughput with out proportionally growing bandwidth necessities for particular person nodes. As blob capability scales past present limits, L2 transaction charges can lower additional whereas sustaining the safety ensures of information availability on Ethereum L1.
To securely ramp blob throughput after PeerDAS is activated, Ethereum will use Blob-Parameter-Solely (BPO) forks. Fusaka contains two deliberate BPO parameter changes on Holesky beginning October 7, 2025, with related schedules for different testnets. These BPOs will increase the per-block blob goal and most from 6 & 9 respectively to 10 & 15 in BPO1 and 14 & 21 in BPO2.
Scale L1
ModExp Optimization
EIP-7883 and EIP-7823 work collectively to optimize the ModExp precompile. EIP-7883 will increase gasoline prices to extra precisely replicate computational complexity, together with elevating minimal gasoline prices and tripling common value calculations. EIP-7823 units higher bounds for ModExp operations. Collectively, these modifications make sure that resource-intensive cryptographic operations are correctly priced and assist potential future block gasoline restrict will increase.
Transaction Gasoline Restrict Cap
EIP-7825 implements a protocol-level transaction gasoline restrict cap of 16,777,216 gasoline, stopping particular person transactions from consuming extreme block gasoline and defending in opposition to DoS assaults. This lays the groundwork for parallel transaction processing within the EVM.
Community Protocol Optimization
EIP-7642 introduces eth/69, which removes pre-merge fields and the receipt Bloom from the networking protocol. This cleanup reduces sync bandwidth necessities, provides an specific historical past serving window for nodes to promote and simplifies the codebase by eradicating legacy parts which can be not wanted post-merge.
Gasoline Restrict Enhance
EIP-7935 raises Ethereum’s default gasoline restrict to 60MM, reflecting the gasoline restrict that core builders imagine Ethereum L1 can safely scale to. This enhance allows extra L1 execution capability and has been completely examined throughout completely different consumer combos to make sure community stability and safety.
Past these efficiency enhancements, Fusaka additionally enhances the person and developer expertise with a number of focused upgrades.
Enhance UX
secp256r1 Precompile
EIP-7951 provides native assist for the secp256r1 elliptic curve via a brand new precompiled contract. This permits direct integration with fashionable safe {hardware} like Apple Safe Enclave, Android Keystore, and FIDO2/WebAuthn units, decreasing friction for mainstream blockchain adoption via acquainted authentication flows.
Depend Main Zeros Opcode
EIP-7939 introduces the CLZ (Depend Main Zeros) opcode, offering a local, gas-efficient technique to carry out elementary bit-counting operations. This addition helps mathematical operations, compression algorithms, and post-quantum signature schemes whereas decreasing ZK proving prices.
Fusaka Specs
The whole record of modifications launched in Fusaka could be present in EIP-7607. The core EIPs embrace:
Further supporting EIPs:
Full specs for the execution and consensus layer modifications can be found within the following releases:
Fusaka additionally introduces modifications to the Engine API used for communication between consensus and execution layer nodes. These are specified within the osaka file of the execution-apis repository.
Fusaka Safety
Safety researchers can take part within the Fusaka audit competition to assist establish potential points earlier than mainnet deployment.
Fusaka Activation
The Fusaka community improve will activate on Holesky, Sepolia, and Hoodi testnets as follows:
| Community | Slot | UTC Time | UNIX Timestamp |
|---|---|---|---|
| Holesky | 5,283,840 | 2025-10-01 08:48:00 | 1759308480 |
| Sepolia | 8,724,480 | 2025-10-14 07:36:00 | 1760427360 |
| Hoodi | 1,622,016 | 2025-10-28 18:53:12 | 1761677592 |
As previously announced, notice that Fusaka would be the final community improve deployed to Holesky. It will likely be shut down shortly after the improve has been deployed on it.
Blob Parameter Solely (BPO) Fork Schedule
Following the primary Fusaka activation, the community will implement Blob Parameter Solely forks to regularly enhance blob throughput. BPO1 will enhance the per-block blob goal and most to 10 & 15 respectively. BPO2 will additional enhance the goal to 14 and most to 21.
Holesky BPO Schedule
| BPO Fork | Epoch | Date & Time (UTC) | Unix Timestamp |
|---|---|---|---|
| BPO1 | 166,400 | 2025-10-07 01:20:00 | 1759800000 |
| BPO2 | 167,936 | 2025-10-13 21:10:24 | 1760389824 |
Sepolia BPO Schedule
| BPO Fork | Epoch | Date & Time (UTC) | Unix Timestamp |
|---|---|---|---|
| BPO1 | 274,176 | 2025-10-21 03:26:24 | 1761017184 |
| BPO2 | 275,712 | 2025-10-27 23:16:48 | 1761607008 |
Hoodi BPO Schedule
| BPO Fork | Epoch | Date & Time (UTC) | Unix Timestamp |
|---|---|---|---|
| BPO1 | 52,480 | 2025-11-05 18:02:00 | 1762365720 |
| BPO2 | 54,016 | 2025-11-12 13:52:24 | 1762955544 |
Consumer Releases
The next consumer releases are appropriate for the Fusaka improve on all three testnets. Additional variations will activate assist on mainnet. As soon as these are launched, one other announcement might be made on this weblog.
Consensus Layer Holesky, Sepolia & Hoodi Releases
When operating a validator, each the Consensus Layer Beacon Node and Validator Consumer have to be up to date.
Word: Lodestar customers ought to at all times use the most recent rc model listed on their releases page.
Execution Layer Holesky, Sepolia & Hoodi Releases
Tooling
| Title | Model | Hyperlink |
|---|---|---|
| mev-boost | v1.10-alpha5 | Download |
FAQ
How do Ethereum community upgrades work?
Ethereum community upgrades require specific opt-in from node operators on the community. Whereas consumer builders come to consensus on what EIPs are included in an improve, they aren’t the final word deciders of its adoption.
For the improve to go reside, validators and non-staking nodes should manually replace their software program to assist the protocol modifications being launched.
In the event that they use an Ethereum consumer that isn’t up to date to the most recent model (listed above), on the fork block, it can disconnect from upgraded friends, resulting in a fork on the community. On this situation, every subset of the community nodes will solely keep related with those that share their (un)upgraded standing.
Whereas most Ethereum upgrades are non-contentious and circumstances resulting in forks have been uncommon, the choice for node operators to coordinate on whether or not to assist an improve or not is a key function of Ethereum’s governance.
For a extra exhaustive overview of Ethereum’s governance course of, see this talk by Tim Beiko.
As an Ethereum mainnet person or ETH holder, is there something I must do?
Briefly, no.
This announcement solely pertains to Ethereum testnets. An extra announcement might be made for Fusaka’s activation on the Ethereum mainnet, however even then, Ethereum mainnet customers and ETH holders aren’t anticipated to should take motion.
As a non-staking testnet node operator, what do I must do?
To be appropriate with the improve on any of those testnets, replace your node’s execution and consensus layer shoppers to the variations listed within the desk above.
As a testnet staker, what do I must do?
To be appropriate with the improve on any of those testnets, replace your node’s execution and consensus layer shoppers to the variations listed within the desk above. Be certain each your beacon node and validator consumer are up to date.
As a non-testnet node operator or staker, what do I must do?
Nothing for now. Additional bulletins might be made for Fusaka’s activation on mainnet.
As an software or tooling developer, what ought to I do?
Assessment the EIPs included in Fusaka to find out if and the way they have an effect on your venture. The introduction of PeerDAS, secp256r1 assist, and the brand new CLZ opcode provide thrilling alternatives for enhanced performance and efficiency optimizations.
Why “Fusaka”?
Upgrades to the execution layer comply with Devcon metropolis names, and people to the consensus layer use star names. “Fusaka” is the mix of Fulu, a star within the constellation of Cassiopeia, and Osaka, the situation of Devcon V.
