PCI-E 1x to 16x Riser Card PCI-Express 1 to 4 Slot PCIe USB3.0 Splitter 1 to 4 Adapter GPU Riser Card for BTC Bitcoin Miner Mining (PCIE 1 to 4USB Kit)

Description

Price: $51.50
(as of Mar 30, 2024 03:01:43 UTC – Details)

Specification:
Type name:1 to 4 PCI-E USB3.0 Adapter Card
Material: Metal+Plastic
Bus Port: PCI-E
Size: approx. 120*65*58mm
Supported OS: for DOS, for Linux, for Windows XP/7/8/10

Features:
1.4 Slots brings great extendability
2.Plugs directly to the board without any extender cable, can be fixed to the case
3.PCI-E slot power solution, no extra power cable needed
Installation Instructions:
1. The first step, when you use the adapter card, the computer needs to be turned off before they can plug the adapter card.
2. The Second step, first of PCIe USB card plugged into the motherboard’s PCIe slot. Use USB3.0 data cable adapter to connect the ends of the two USB port. Plug in the power supply.
3. The third step: After completion of the above two steps, first in no hurry to insert your PCI-E card, start the computer to see if your computer has been identified to the riser card, if you did not find the card, repeat the above operation (Note: The first time to insert card to start the computer, into the system in general will be prompted to install new hardware, such as “PCI standard PCI-to-PCI bridge” , you need to wait for it to automatically install the complete, individual software will prevent these files installation, note skipped), when your computer has been recognized the card,blue LED PCI slot on normal light, computer equipment manager in the system device will show an increase of several “PCI standard PCI-to-PCI bridge.
4.After completing the above three steps, turn off the computer, plug in your PCI-E card, to be careful not to insert the contrary,
5.Then boot into the system, install PCI-E Card Driver.
Easy and convenient to settle and install,with IC heat radiator.
High speed USB 3.0 shield cable is flexible for 1U,2U,3U chassis.Support 4 port high speed PCIe 16X card.Supported OS: for DOS, for Linux, for Windows XP/7/8/10.
This extension is applicable to the PCI – EX4, X8, X16 slot, Please plug in the power cord for the floppy. When plug PCI – E extension must be computer broken wires plug again.
When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.